Member currently has no playlists.
Set Compound to 29.5 Degrees
Set compound to 29.5 degrees.
Drill both ends #7(.201) x .750 deep.
Hand tap both ends 1/4-20.
Facing and Center Drill
Face cut off end and center drill both ends.
Turn down and cut off hammer head.
45 degree chamfer
Add 45 degree chamfer to handle.
Cut .375 radius
Cut .375 radius on end of handle with form tool.
Knurl the .750 diameter of handle.
Turning long diameter
Turning 6.00" long diameter down to .485"O.D.