WEBVTT

00:00.500 --> 00:04.000
In this short video, we'll be demonstrating the process of

00:04.000 --> 00:08.000
connecting and disconnecting a microphone to a Shure Mic Pack,

00:08.000 --> 00:10.500
available in some classrooms on campus. 

00:11.500 --> 00:14.500
It's critical to take care when following this process.

00:14.500 --> 00:21.000
Destruction of microphones and mic packs is expensive and
disrupts anyone else who would use a classrooms mic system. 

00:21.500 --> 00:28.500
To connect a microphone to the Shure Mic pack,
first examine the pins in the mic pack, checking that they are straight.

00:28.500 --> 00:34.500
With the black button facing toward the front of the Mic Pack,
press it straight into the slot. 

00:34.500 --> 00:41.000
Do not twist as you insert the microphone into the slot,
as this will damage the mic pack and microphone.

00:41.000 --> 00:45.000
You should hear a clicking noise when the microphone is properly seated.

00:49.500 --> 00:54.000
To disconnect the microphone from the Shure Mic pack, firmly grasp the mic pack. 

00:54.000 --> 00:58.500
Then, press and hold the black button at the base of the microphone cable.

00:59.000 --> 01:02.000
Pull the microphone straight out of the slot.

01:02.500 --> 01:07.000
Do not twist the cable, as this will damage the mic pack and microphone.

01:07.500 --> 01:12.000
The microphone base should disconnect from the mic pack with minimal effort.

01:12.000 --> 01:18.500
If you are having difficulty removing the microphone,
please double check that you are fully depressing the black button. 

01:19.000 --> 01:26.500
If you discover a microphone or mic pack that is not in working order,
please report this to the UVM Tech Team.

01:26.500 --> 01:31.000
You can find the Tech Team's contact information at uvm.edu.